manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 184

2-72

Storage Compartments

Your vehicle’s large carrying capacity can store many
items. If you have the extended wheelbase version, you
can carry things as large as a 4

i x 8i piece of plywood.

You can also use the floor pins that are used to attach the
seats, to secure larger loads.

Glove Box

Your vehicle has a glove box below the instrument
panel. To open the glove box, lift the latch release. 
Use the key to lock or unlock the glove box.

The glove box door has a detent to prevent the door
from lowering too far. Open the glove box until the door
is partway open, then pull the door down if you need it
fully open. To close the glove box, the door must be
pushed up past the detent.

In the door of the glove box, you will find a tissue pack
holder and clip for a pen or pencil.

Compact Overhead Console (Canada Only)

The front overhead console includes two reading 
lamps, a storage compartment and the overhead 
console switchbank.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands