manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 224

2-112

Change Engine Oil Message

United States

Canada

If this message comes on and stays on after you started
the engine, have the oil changed.

For additional information, see “Engine Oil, When to
Change” in the Index. After changing the engine oil the
system must be reset. See “How to Reset the Change
Engine Oil Message” in the Index.

Power Sliding Door Warning Message

United States

Canada

This message will come on if the power sliding door is
not completely closed and the ignition is turned to 
RUN or START.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands