manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 158

2-46

To Use the Engine Coolant Heater

1. Turn off the engine.

2. Open the hood and unwrap the electrical cord. 

The electrical cord is located on the driver’s side of
the engine compartment.

3. Plug it into a normal, grounded 110

-

volt AC outlet.

CAUTION:

Plugging the cord into an ungrounded outlet
could cause an electrical shock. Also, the wrong
kind of extension cord could overheat and cause
a fire. You could be seriously injured. Plug the
cord into a properly grounded three

-

prong

110

-

volt AC outlet. If the cord won’t reach, use a

heavy

-

duty three

-

prong extension cord rated for

at least 15 amps.

4. Before starting the engine, be sure to unplug and store

the cord as it was before to keep it away from moving
engine parts. If you don’t, it could be damaged.

How long should you keep the coolant heater plugged
in? The answer depends on the outside temperature, the
kind of oil you have, and some other things. Instead of
trying to list everything here, we ask that you contact
your dealer in the area where you’ll be parking your
vehicle. The dealer can give you the best advice for 
that particular area.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands