manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 215

2-103

D If the traction control system is affected by an

engine

-

related problem, the system will turn off and

the warning light will come on.

If the traction control system warning light comes on
and stays on for an extended period of time when the
system is turned on, your vehicle needs service.

Engine Coolant Temperature Gage

United States

Canada

This gage shows the engine coolant temperature. 
If the gage pointer moves into the red area, your engine
is too hot!

It means that your engine coolant has overheated. If you
have been operating your vehicle under normal driving
conditions, you should pull off the road, stop your
vehicle and turn off the engine as soon as possible.

See “Engine Overheating” in the Index.

Malfunction Indicator Lamp (Service
Engine Soon Light in the United States or
Check Engine Light in Canada)

United States

Canada

Your vehicle is equipped with a computer which
monitors operation of the fuel, ignition and emission
control systems.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands