manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 221

2-109

The message may appear for the following reasons:
D If there’s a brake system problem that is specifically

related to traction control, the traction control system
will turn off and the warning message will come on.
If your brakes begin to overheat, the traction control
system will turn off and the warning message will
come on until your brakes cool down.

D If the traction control system is affected by an

engine

-

related problem, the system will turn off and

the warning message will come on.

If the traction control system warning message comes on
and stays on for an extended period of time when the
system is turned on, your vehicle needs service.

Traction Active Message (Option)

United States

Canada

If your vehicle has the traction control system, the
TRACTION ACTIVE message will appear when the
traction control system is limiting wheel spin. You may
feel or hear the system working, but this is normal.

Slippery road conditions may exist if this message
appears, so adjust your driving accordingly. The
message will stay on for a few seconds after the traction
control system stops limiting wheel spin.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands