Pontiac 2001 Montana Owner'S Manual Download Page 71

Page: 71 / 456

1-59

Center Passenger Position
(Bucket Seat)

Lap Belt

If your vehicle has bucket seats, someone can sit in the
center position bucket seat.

When you sit in the center position bucket seat, you
have a lap safety belt which has a retractor.

1. Pick up the latch plate and, in a single motion, pull

the belt across you. Don’t let it get twisted.

2. Push the latch plate into the buckle until it clicks.

If the belt stops before it reaches the buckle, let it go
back all the way and start again. Pull up on the latch
plate to make sure it is secure.

3. Feed the lap belt into the retractor to tighten it.

Summary of Contents for 2001 Montana








































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Montana

Reviews:

Brands by name

Popular brands

Pontiac 2001 Montana, Owner'S Manual

Search results

Summary of Contents for 2001 Montana

Reviews:

Brands by name

Popular brands