manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 178

2-66

Fog Lamps

The fog lamps switch is
located in the instrument
panel switchbank. Push the
fog lamp symbol on the
switch to turn on the lamps.

The indicator light will glow when the fog lamps are 
on. Push the top part of the switch to turn them off. 
The indicator light will go off.

Your parking lamps or headlamps must be on for your
fog lamps to turn on.

When your DRL are on, the headlamp control must first
be turned from the off position before the fog lamps can
be turned on. At night, when the light sensor automatically
turns on your headlamps, the fog lamps can be turned on
when the headlamp control is in any position.

Your fog lamps will go off when you switch to high
beams. Using your high beams in fog is not recommended.

Interior Lamps

Instrument Panel Intensity Control

Turn the thumbwheel, located below the headlamps
control, clockwise to increase the brightness of the
instrument panel lights, and counterclockwise to
decrease the brightness. Turn the thumbwheel all the
way counterclockwise to turn them off.

Interior Lamps Control

Turn the thumbwheel all the way clockwise to turn on
the interior lamps, if the interior lamps override switch
is off. Turn the thumbwheel counterclockwise to turn the
lamps off.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands