manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 330

5-17

How to Add Coolant to the Radiator

1. You can remove the radiator pressure cap when the

cooling system, including the radiator pressure cap
and upper radiator hose, is no longer hot. Turn 
the pressure cap slowly counterclockwise until it 
first stops. (Don’t press down while turning the
pressure cap.)

If you hear a hiss, wait for that to stop. A hiss means
there is still some pressure left.

2. Then keep turning the pressure cap, but now push

down as you turn it. Remove the pressure cap.

CAUTION:

You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot
enough. Don’t spill coolant on a hot engine.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands