Pontiac 2001 Montana Owner'S Manual Download Page 22

Page: 22 / 456

1-10

2. Push the red center

of the buckle up with
a small pointed
object

like a key or a

pen

to remove the

seat belt, if needed.

3. Lift the seatback recliner lever or pull the nylon strap

on the back of the seat to fold the seatback forward.

4. Slide the seat all the way back by lifting one of the

adjustment levers and sliding the seat fully rearward.

5. From behind the bench seat, pull the nylon strap at

the center of the base of the seat to release the rear
latches from the floor pins.

Do not let go of the strap until the seat is folded all
the way forward.

Summary of Contents for 2001 Montana








































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Montana

Reviews:

Brands by name

Popular brands

Pontiac 2001 Montana, Owner'S Manual

Search results

Summary of Contents for 2001 Montana

Reviews:

Brands by name

Popular brands