manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 249

3-18

SCV: Your system has a feature called
Speed

-

Compensated Volume (SCV). With SCV, your

audio system adjusts automatically to make up for road
and wind noise as you drive. Set the volume at the
desired level. Press this button to select MIN, MED or
MAX. Each choice allows for more volume
compensation at faster vehicle speeds. Then, as you
drive, SCV automatically increases the volume, as
necessary, to overcome noise at any particular speed.
The volume level should always sound the same to you
as you drive. If you don’t want to use SCV, select OFF.

Finding a Station

AM FM: Press this button to switch between AM, FM1
and FM2. The display shows your selection.

TUNE: Turn this knob to choose radio stations.

SEEK: Press the up or down arrow to go to the next
higher or lower station and stay there. The sound will
mute while seeking.

SCAN: Press and hold one of the SEEK arrows for 
two seconds until the scan icon appears on the display
and you hear a beep. Use SCAN to listen to stations for
a few seconds. The radio will go to a station, stop for a
few seconds, then go on to the next station. Press one of
the SEEK arrows again to stop scanning. The sound will
mute while scanning.

PUSHBUTTONS: The six numbered pushbuttons let
you return to your favorite stations. You can set up to
18 stations (six AM, six FM1 and six FM2) by
performing the following steps:

1. Turn the radio on.

2. Press AM FM to select the band.

3. Tune in the desired station.

4. Press EQ to select the equalization.

5. Press and hold one of the six numbered buttons until you

hear a beep. Whenever you press that numbered button,
the station you set will return and the equalization that you
selected will also be automatically selected for that button.

6. Repeat the steps for each pushbutton.

PRESET SCAN: Press and hold one of the SEEK
arrows for more than four seconds until the preset scan
icon and the preset number appear on the display. 
You will hear a double beep. Use PRESET SCAN to
listen to each of your preset stations for a few seconds.
The radio will go to the first preset station stored on
your pushbuttons, stop for a few seconds, then go on to
the next preset station. Press one of the SEEK arrows
again to stop scanning presets.

Preset scan will skip over presets where no station is
being received at that time to prevent hearing static.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands