Pontiac 2001 Montana Owner'S Manual Download Page 21

Page: 21 / 456

1-9

Adjusting the Split Bench Seats

There are two adjustment levers on each section of the
split bench seats to adjust the seat forward or rearward.

One is located below the center, in the front of each
section of the split bench.

The other lever is located on
the rear of the seat.

Lift up either lever and slide the seat forward or
rearward. Release the lever. Push and pull on the seat to
make sure it is locked into place.

Removing the Split Bench Seat

Make sure the seatback is in the upright position.

1. For the second row split bench, with the seatback in

the upright position, unhook the side attachment for
the safety belt. This mini

buckle is located on the

right side of the seat.

Summary of Contents for 2001 Montana








































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Montana

Reviews:

Brands by name

Popular brands

Pontiac 2001 Montana, Owner'S Manual

Search results

Summary of Contents for 2001 Montana

Reviews:

Brands by name

Popular brands