Pontiac 2001 Montana Owner'S Manual Download Page 331

Page: 331 / 456

5-18

Bypass Tube

Housing

3. After the engine cools, open the coolant air

bleed valves.

There are two bleed valves. One is located on the
thermostat housing. The other is located on the
thermostat bypass tube.

4. Fill the radiator with the proper DEX

COOL

coolant mixture, up to the base of the filler neck.
See “Engine Coolant” in the Index for more
information about the proper coolant mixture.

If you see a stream of coolant coming from an air
bleed valve, close the valve. Otherwise, close the
valves after the radiator is filled.

5. Rinse or wipe any spilled coolant from the engine

and the compartment.

Summary of Contents for 2001 Montana








































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Montana

Reviews:

Brands by name

Popular brands

Pontiac 2001 Montana, Owner'S Manual

Search results

Summary of Contents for 2001 Montana

Reviews:

Brands by name

Popular brands