manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 367

6-21

Then, without shutting off the engine, follow these steps:

The dipstick is located toward the back of the engine
compartment, next to the brake master cylinder. 
The dipstick has a bright, red loop design for easy
identification. See “Engine Compartment Overview” 
in the Index for more information on location.

1. Pull out the dipstick and wipe it with a clean rag or

paper towel.

2. Push it back in all the way, wait three seconds and

then pull it back out again.

3. Check both sides of the dipstick, and read the lower

level. The fluid level must be in the cross

-

hatched area.

4. If the fluid level is in the acceptable range, push the

dipstick back in all the way.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands