manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 170

2-58

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
D Turn Signal and Lane

-

Change Indicator

D Headlamp High/Low

-

Beam Changer

D Flash

-

to

-

Pass

D Windshield Wiper and Washer Control
D Cruise Control (Option)

Turn Signal and Lane-Change Indicator

The turn signal has two upward (for right) and 
two downward (for left) positions. These positions allow
you to signal a turn or a lane change.

To signal a turn, move the lever all the way up or down. 
When the turn is finished, the lever will return automatically.

An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.

To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.

As you signal a turn or a lane change, if the arrow
flashes faster than normal, a signal bulb may be burned
out and other drivers won’t see your turn signal.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands