manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 343

5-30

Storing a Flat or Spare Tire and Tools

CAUTION:

Storing a jack, a tire or other equipment in the
passenger compartment of the vehicle could
cause injury. In a sudden stop or collision, loose
equipment could strike someone. Store all these
in the proper place.

1. Lay the tire near the rear of the vehicle with the

valve stem down.

2. Slide the cable retainer through the center of the

wheel and start to raise the tire.

Make sure the retainer is fully seated across the
underside of the wheel.

3. When the tire is almost in the stored position, 

turn the tire so the valve is towards the rear of 
the vehicle.

This will help when you check and maintain tire
pressure in the spare.

4. Raise the tire fully against the underside of the

vehicle. Continue turning the folding wrench until
the tire is secure and the cable is tight. The spare tire
hoist cannot be overtightened.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands