manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 312

4-38

Making Turns

NOTICE:

Making very sharp turns while trailering could
cause the trailer to come in contact with the
vehicle. Your vehicle could be damaged. Avoid
making very sharp turns while trailering.

When you’re turning with a trailer, make wider turns
than normal. Do this so your trailer won’t strike 
soft shoulders, curbs, road signs, trees or other 
objects. Avoid jerky or sudden maneuvers. Signal well
in advance.

Turn Signals When Towing a Trailer

When you tow a trailer, your vehicle has to have 
extra wiring.

The arrows on your instrument panel will flash
whenever you signal a turn or lane change. Properly
hooked up, the trailer lamps will also flash, telling other
drivers you’re about to turn, change lanes or stop.

When towing a trailer, the arrows on your instrument
panel will flash for turns even if the bulbs on the trailer
are burned out. Thus, you may think drivers behind 
you are seeing your signal when they are not. It’s
important to check occasionally to be sure the trailer
bulbs are still working.

Driving On Grades

Reduce speed and shift to a lower gear before you start
down a long or steep downgrade. If you don’t shift
down, you might have to use your brakes so much that
they would get hot and no longer work well.

If you are towing a trailer that weighs more than
1,000 lbs. (450 kg), you may prefer to drive in 
THIRD (3) instead of AUTOMATIC OVERDRIVE (D)
(or, as you need to, a lower gear). This will minimize
heat build

-

up and extend the life of your transaxle.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands