manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 222

2-110

Engine Coolant Temperature 
Warning Message

United States

Canada

This message will come on when your engine gets 
too hot.

If this message comes on, it means that your engine
coolant has overheated. If you have been operating your
vehicle under normal driving conditions, you should
pull off the road, stop your vehicle and turn off the
engine as soon as possible.

See “Engine Overheating” in the Index.

Low Oil Pressure Message

United States

Canada

Your vehicle is equipped with a low oil pressure
warning message.

Your oil pressure message lets you know when you may
have a problem with your engine oil pressure.

When the engine is running and this message appears,
the engine oil level may be too low. There may also be
another problem causing low oil pressure.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands