manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 340

5-27

6. Remove all the wheel nuts and take off the flat tire.

7. Remove any rust or dirt

from the wheel bolts,
mounting surfaces and
spare wheel.

CAUTION:

Rust or dirt on the wheel, or on the parts to which
it is fastened, can make the wheel nuts become
loose after a time. The wheel could come off and
cause an accident. When you change a wheel,
remove any rust or dirt from the places where the
wheel attaches to the vehicle. In an emergency, you
can use a cloth or a paper towel to do this; but be
sure to use a scraper or wire brush later, if you
need to, to get all the rust or dirt off.

CAUTION:

Never use oil or grease on studs or nuts. If you
do, the nuts might come loose. Your wheel could
fall off, causing a serious accident.

8. Install the spare tire and put the wheel nuts back on

with the rounded end of the nuts toward the wheel.
Tighten each nut by hand until the wheel is held
against the hub.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands