manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 305

4-31

CAUTION:

Things you put inside your vehicle can strike 
and injure people in a sudden stop or turn, or 
in a crash.
D Put things in the cargo area of your vehicle.

Try to spread the weight evenly.

D Never stack heavier things, like suitcases,

inside the vehicle so that some of them are
above the tops of the seats.

D Don’t leave an unsecured child restraint in

your vehicle.

D When you carry something inside the

vehicle, secure it whenever you can.

D Don’t leave a seat folded down unless you

need to.

Electronic Level Control (Option)

On vehicles equipped with the optional electronic level
control, the rear of the vehicle is automatically kept
level as you load or unload your vehicle. However, you
should still not exceed the GVWR or the GAWR.

If the engine is running or the ignition key is in
ACCESSORY or when Retained Accessory Power
(RAP) is active, you may hear the compressor 
operating when you load or unload your vehicle, and
periodically as the system self

-

adjusts. This is normal.

See “Retained Accessory Power” in the Index.

The compressor should operate for brief periods of time.
If the sound continues for an extended period of time,
your vehicle needs service.

Using heavier suspension components to get added
durability might not change your weight ratings. Ask
your dealer to help you load your vehicle the right way.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands