manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 371

6-25

Adding Coolant

If you need more coolant, add the proper DEX

-

COOL

R

coolant mixture at the coolant recovery tank.

CAUTION:

Turning the radiator pressure cap when the
engine and radiator are hot can allow steam 
and scalding liquids to blow out and burn you
badly. With the coolant recovery tank, you will
almost never have to add coolant at the radiator.
Never turn the radiator pressure cap 

--

 even a

little 

--

 when the engine and radiator are hot.

Add coolant mixture at the recovery tank, but be careful
not to spill it.

CAUTION:

You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol,
and it will burn if the engine parts are hot
enough. Don’t spill coolant on a hot engine.

Occasionally check the coolant level in the radiator. 
For information on how to add coolant to the radiator,
see “Cooling System” in the Index.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands