PerkinElmer CLARUS 600 GC, User Manual

Page: 83 / 362

Clarus 600/680 User’s Guide
3-11
3. Enter a ramp initial rate 1 of
2
°
C/min
.
4. For Temp 2, enter a temperature of
70
°
C
.
5. Enter a time of
10 min.
Setting Up a Multiramp Temperature Program
The following example shows how to expand the above one-ramp program to a two-ramp
program. The parameter values used in the example are shown below:
Parameter Value
Rate 2 4 °C/min
Temp 3 100 °C
Time 3 5 min
Rate 3 0 °C/min
1. From the oven tab enter a rate of
4
.
2. Enter a temperature of 100 .
3. Enter a time of 5 .
NOTE: You can enter RATE 3, TEMP 4, and TIME 4 to set up a third ramp.
Holding an Oven Temperature
While running a temperature program, you can hold the oven temperature by setting it to
the temperature of the unexecuted steps.
To hold an oven temperature during a temperature program:
1. In the System Status screen touch the
oven
button .