Panasonic MINAS A5-series, Operating Instructions Manual

Page: 311 / 394

7-15
1
Before
Using
the
Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When
in
Trouble
7
Supplement
6
Junction connector for
encoder cable
(Optional connector kit)
Pin number when a connector (small motor) is used
Pin number when a connector (large motor) is used
Connector, CN X6
(Optional connector kit)
3
5
2
1
2
5
6 1
Connector, ZHR-2
(by J.S.T.)
Connector for absolute encoder connection
(To be provided by customer)
* 1 Battery for absolute encoder (Option):
DV0P2990
Battery box for absolute encoder:
DV0P2990
2
1
2
7
4
1
(4)
(1)
(6)
(5)
(3)
(7)
(9)
E5V
E0V
BAT+
BAT– BAT+
BAT–
PS
BAT–
BAT+
FG
PS
E5V
E0V
PS
PS
FG (Case)
Twisted
pair
Title
Connector
Connector pin
Clamping Jig
Part No.
ZMR-2
SMM-003T-P0.5
YRS-800
Manufacturer
J.S.T.
J.S.T.
J.S.T.
Battery
* 1
• Wiring Diagram
Related page
• P.7-89 “Battery For Absolute Encoder”
2. Absolute system
Battery (for Backup) Installation
When you make your own cable for 17-bit absolute encoder
Caution
When you make your own cable for 17-bit absolute encoder, connect the optional battery
for absolute encoder, DV0P2060 or DV0P2990 as per the wiring diagram below. Connec-
tor of the battery for absolute encoder shall be provided by customer as well.
Install and fix the battery securely. If the installation and fixing of the battery is not appro -
priate, it may cause the wire breakdown or damage of the battery.
Refer to the instruction manual of the battery for handling the battery.
• Installation Place
1) Indoors, where the products are not subjected to rain or direct sun beam.
2) Where the products are not subjected to corrosive atmospheres such as hydrogen
sulfide, sulfurous acid, chlorine, ammonia, chloric gas, sulfuric gas, acid, alkaline
and salt and so on, and are free from splash of inflammable gas, grinding oil, oil
mist, iron powder or chips and etc.
3) Well-ventilated and humid and dust-free place.
4) Vibration-free place