2-76
(2) Analog inputs 1 to 3 automatic offset adjustment
This function automatically adjusts offset setting of analog input.
Analog input 1 (AI1)......Pr4.22 (Analog input 1 (AI1) offset setup)
Analog input 2 (AI2)......Pr4.25 (Analog input 2 (AI2) offset setup)
Analog input 3 (AI3)......Pr4.28 (Analog input 1 (AI3) offset setup)
Remarks
Note
• This function is invalid at position control mode.
• You cannot write the data only by executing automatic offset adjustment.
Execute a writing to EEPROM when you need to reflect the result afterward.
• After completion of the automatic offset adjustment, return to SELECTION display by
referring to P.2-54 “Structure of Each Mode”.
• When you execute automatic offset adjustment, make
command input to 0V,then keep pressing until the display
changes to .
• Press to call for
EXECUTION display.
(SET button)
Automatic offset
adjustment finishes.
Automatic offset adjustment starts.
* Example of Analog input1(AI1).
Error occurs.
Adjustment
finishes.
(
Invalid mode is selected,
)
or offset value exceeds
the setup range of Pr4.22.
“ ” increases while keep
pressing (for approx. 5sec)
as the right fig. shows.
(SET button)
SELECTION display
EXECUTION display
15. How to Use the Front Panel
Auxiliary Function Mode (EXECUTION display)
Summary of Contents for MINAS A5-series
Page 36: ...1 24 MEMO ...
Page 118: ...2 82 MEMO ...
Page 168: ...3 50 MEMO ...
Page 272: ...5 42 MEMO ...