Panasonic MINAS A5-series, Operating Instructions Manual

Page: 7 / 394

7
In the case of the motor with shaft end keyway, do
not touch the keyway with bare hands.
Failure to observe this instruc-
tion could result in personal
injury.
Do not touch the rotating portion of the motor
while it is running.
Do not touch the motor, servo driver, heat sink
and regenerative resistor, since they become very
hot.
Failure to observe this instruc-
tion could result in burns.
Do not drive the motor with external power.
Failure to observe this instruc-
tion could result in fire.
Do not subject the cables to excessive force,
heavy object, or pinching force, nor damage the
cables.
Failure to observe this instruc-
tion could result in electrical
shocks, damages and break-
downs.
Installation area should be free from excessive
dust, and from splashing water and oil.
Failure to heed this precaution
will result in electric shock, per-
sonal injury, fire, malfunction or
damage.
Mount the motor, driver and regenerative resistor
on incombustible material such as metal.
Installation on a flammable ma
-
terial may cause fire.
Wiring has to be carried out by the qualified and
authorized specialist.
Allowing a person with no ex-
pertise to carry out wiring will
result in electrical shocks.
Correctly run and arrange wiring.
Incorrect wiring will result in
short circuit, electric shock, per-
sonal injury, etc.
After correctly connecting cables, insulate the live
parts with insulator.
Incorrect wiring will result short
circuit, electric shock, fire or
malfunction.
Ground the earth terminal of the motor and driver
without fail. Floating ground circuit will
cause electric shock.
Install and mount the Product and machinery
securely to prevent any possible fire or accidents
incurred by earthquake.
Failure to heed this requirement
will result in electric shock, per-
sonal injury, fire, malfunction or
damage.
Install an emergency stop circuit externally so that
you can stop the operation and shut off the power
immediately.
Install an overcurrent protection, earth leakage
breaker, over-temperature protection and emer-
gency stop apparatus without fail.
Failure to heed these require
-
ments will result in electric
shock, personal injury or fire.
Check and confirm the safety of the operation
after the earthquake.
Before transporting, wiring and inspecting the
driver, turn off power and wait for a time longer
than that specified on the name plate on the side
panel of the product; and make sure that there is
no risk of electrical shock.
Energized circuit will cause
electric shock.
1
Before Using the Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When in T
rouble
7
Supplement