Panasonic MINAS A5-series, Operating Instructions Manual

Page: 16 / 394

1-
A to D-frame
F-frame
Charge lamp
L1C
L2C
L1
L2
L3
B1
B3
B2
V
U
W
Connector XA:
for main power connection
05JFAT-SAXGF (JST)
Connector XB:
for motor connection
06JFAT-SAXGF (JST)
Terminals for external
regenerative resistor
(Normally short-circuit
B3 to B2)
Connector X6:
for encoder
connection
Connector X4: Parallel I/O connector
Connector X3: Safety function connector
Connector X2: for Serial bus
Connector X1: USB connector
Connector X5:
for feedback scale
connection
Connector X7: Monitor connector
Front panel
LED cover
Safety by-pass prug
Screws for earth (x2)
Main power
input terminals
Control power
input terminals
Terminals for motor
connection
1
Before Using
the Products
2. Driver
Parts Description
Note
Connector X1 and X2 are attached in A to D-frame driver.
Connector XA, XB and XC are attached in E-frame driver.
Screws for earth
(x2)
Charge lamp
L1C
L2C
L1
L2
L3
B1
B3
B2
NC
U
V
W
Connector XA:
for main power connection
05JFAT-SAXGSA-L (JST)
Connector XB:
Connector for external
regenerative resistor
03JFAT-SAXGSA-L (JST)
Connector XC:
for motor connection
04JFAT-SAXGSA-L (JST)
Terminals for external
regenerative resistor
(Normally short-circuit
B3 to B2)
Terminals for motor
connection
Control power
input terminals
Main power
input terminals
Connector X6:
for encoder
connection
Connector X4: Parallel I/O connector
Connector X3: Safety function connector
Connector X2: for Serial bus
Connector X1: USB connector
Connector X5:
for feedback scale
connection
Connector X7: Monitor connector
Front panel
LED cover
Safety by-pass prug