Panasonic MINAS A5-series, Operating Instructions Manual

Page: 65 / 394

2-29
1
Before
Using
the
Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When
in
Trouble
7
Supplement
The connector X7 of the front panel is for monitor output.
Analogue output : 2 systems
Digital output : 1 systems
In both cases, it is possible to switch the output signal by setting parameters.
Connector X7
Manufacturer’s part No.: 530140610
Manufacturer: Japan Molex Inc.
6 1
X7
Application Symbol Connector
Pin No.
Contents
Analogue monitor
output 1
AM1 1
Output the analogue signal for moni-
tor.
Analogue monitor
output 2
AM2 2
Signal ground GND 3 Connected to ground of control circuit.
Digital monitor output DM 4 Output the digital signal for monitor.
NC – 5 Do not connect.
NC – 6 Do not connect.
• Parameter rerated to monitor output.
Parametr No.
Title Function
Class No.
4 16
Type of analog
monitor 1
Select the type of monitor for analog monitor 1.
4 17
Analog monitor 1
output gain
Set up the output gain of analog monitor 1.
4 18
Type of analog
monitor 2
Select the type of monitor for analog monitor 2.
4 19
Analog monitor 2
output gain
Set up the output gain of analog monitor 2.
4 20
Type of digital
monitor
Select type of the digital monitor.
4 21
Analog monitor
output setup
Select output format of the analog monitor.
Note
For details of parameters, refer to P.4-35 “Details of parameter”.
2
Preparation
9. Wiring to the connector, X7
Monitor output