Panasonic MINAS A5-series, Operating Instructions Manual

Page: 103 / 394

2-67
1
Before
Using
the
Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When
in
Trouble
7
Supplement
15. How to Use the Front Panel
Monitor Mode (EXECUTION display)
(11) Display of No. of changes in I/O signals
.....Input signal
.....Output signal
Pin No.
No. of changes in I/O signals (the signal is invalid)
• Select the No. of pin, the number of changes on that pin should be displayed,
by pressing or button.
• The switch of input/output, by pressing or button.
(Left side of decimal point : Pin No. selection)
(Right side of decimal point : Input/Output Pin No. selection)
(Lowest place Pin No.
of output signal)
(Highest place Pin No.
of input signal)
• Shift the flashing decimal point with .
(12) Display of absolute encoder data
Encoder data
......One revolution data, Low order (L)
• Select the data to be displayed by pressing or button.
......One revolution data, High order (H)
......Multi-revolution data