Panasonic LX-TD500, Programming Manual

Page: 347 / 388

Programming Error Messages
Programming Guide 347
E5010 Specify the code.
The account code also must be entered when the TRS Level is assigned and the TRS
Level also must be deleted when the account code is deleted.
E5011 Specify the leading digits.
The ARS leading dial also must be entered when the Route Plan Table No. is assigned
and the Route Plan Table No. also must be deleted when the leading dial is deleted.
E5022 File format error.(Line: X)
Format (syntax) error was found at the indicated line (X) in the database file.
E6001 Too long TRS Deny or Exception dial.
TRS Deny or Exception dial can be registered up to 10 digits consisting of 0–9, , #
or X (a wild card).
E6002 Cannot assign more than 400 TRS deny codes.
There is a limit of 400 toll restriction deny codes per system.
E6003 Cannot assign more than 200 TRS exception codes.
There is a limit of 200 toll restriction exception codes per system.
E7001 Invalid arrangement of time zones.
Each successive ARS time zone must be later in time. Namely, this pattern must be
followed: Time-A < Time-B < Time-C < Time-D.
E7002 Assign both trunk group number and modification table number.
Cannot assign just trunk group number or just modification table number.
Both must be assigned as a pair under ARS routing plan.
E9001 Invalid directory number for DID destination.
There are seven possible destinations for DID calls:
(1) An extension, (2) an external pager (TAFAS), (3) an OGM group,
(4) a remote extension, (5) an extension group, (6) an incoming group or
(7) a phantom extension.
E9002 Page length must be 4 lines more than Skip Perforation.
The difference of Page Length and Skip Perforation must be more than 4 lines.
E9003 Trunk or extension card duplicated.
Under Power Failure Transfer, a trunk card or an extension card can be specified only
once.
E9004 Assign both trunk card and extension card.
Cannot assign just trunk card or just extension card.
Both must be assigned as a pair under Power Failure Transfer.
E9005 Time or date format error.
The invalid value of time or date is entered.
E9006 Invalid System Programming password.
Please assign the 4 through 7-digit System Programming password of alphanumeric
characters.
Error Code
Error Message
Description