Omron SYSMAC CP Series, User Manual

Page: 445 / 578

18-13
1 8 Programming Device Operations
CP2E CPU Unit Software User’s Manual(W614)
1
8-3 Creating
a Lad
d
er Pr
og
ram
18
1
8
-
3
-1 Inputting a Lad
der Pro
g
ram
z
Automatic Creation of Symbol Names and I/O Comments
If there are symbol names or I/O comments in the rung that was copied, executing the Addre ss
Increment Copy Command will automatically create symbol names and I/O comments.
• Automatic Symbol Name Creation
• Automatic I/O Comment Creation
• Automatic Creation Rules
By default, automatic creation is governed by the following rules.
Target Automatic creation rule Description
Symbol names Increment the numbers
found from tail. The symbol name is searched for a number starting from the
end, and any number that is found is incremented by 1.
If no number is found, an underbar and a sequential number
starting from 1 are appended.
I/O comments Increment the numbers
found from tail. The I/O comment is searched for a number starting from the
end, and any number that is found is incremented by 1.
If no number is found, an underbar and a sequential number
starting from 1 are appended.
Addresses are
a
u tomatically incremented
w hen the r u ng is pasted.
· Bits:
Example: Incrementing b y +16 Bits (One W ord)
Example: CIO 0.00 is incremented to CIO 1.00.
· W ords:
Example: Incrementing b y +10 W ords
Example: D100 is incremented to D110.
A u tomatically
incremented.
Example:
The sym
b ol name Sensor02 is a u tomatically
created from the sym b ol name Sensor01.
Example:
The sym
b ol name ALARM_1 is a u tomatically
created from the sym b ol name ALARM.
Example:
The sym
b ol name LAMP_Bl u e_1 is a u tomatically
created from the sym b ol name LAMP_Bl u e.
A u tomatically incremented.
Any n u m b er at the end of
an I/O comment is
incremented
b y 1.
W hen there are no n u m b ers in the I/O
comment, se qu ential n u m b ers starting
from 1 w ill b e added after an u nder b ar.