Omron SYSMAC CP Series, User Manual

Page: 10 / 578

6
CP2E CPU Unit Software User's Manual(W614)
Terminology and Notation
Term Description
E-type CPU Unit An essential model of CPU Unit that supports connections to Programmable Terminals
and basic control applications using instructions such as basic, movement, arithmetic,
and comparison instructions.
Essential models of CPU Units are called “E -type CPU Units” or “E14/20 CPU Units”
in this manual.
The models of E -type CPU Units are shown below.
CP2E-E D -
S-type CPU Unit A standard model of CPU Unit that supports connections to inverters and servo drives.
Standard models of CPU Units are called “S -type CPU Units” or “S 3 0/40/60 CPU
Units” in this manual.
The models of S -type CPU Units are shown below.
CP2E-S D -
N-type CPU Unit A network model of CPU Unit that supports Ethernet connection and enhanced position-
ing functions such as 4-axis linear interpolation and pulse.
Network models of CPU Units are called “N -type CPU Units” or “N 3 0/40/60 CPU
Units” in this manual.
The models of N -type CPU Units are shown below.
CP2E-N D -
CX-One
CX-Programmer A programming device that applies for programming and debugging PLCs.
CP2E CPU Units are supported by CX-One version 4.51 or higher and CX-Programmer
version 9.72 or higher.