Omron SYSMAC CP Series, User Manual

Page: 122 / 578

7 PLC Setup
7-6
CP2E CPU Unit Software User’s Manual(W614)
2 2- 3 RS-2 3 2C (No-protocol) Settings
2- 3 -1 Baud 9,600 bps 1,200 bps When power is turned ON
2,400 bps
4, 8 00 bps
9,600 bps
19,200 bps
38 ,400 bps
57,600 bps
115,200 bps
2- 3 -2 Format
(data length, stop bits, par-
ity) 7 bits, 2 bits, even 7 bits, 2 bits, even When power is turned ON
7 bits, 2 bits, odd
7 bits, 2 bits, no parity
7 bits, 1 bit, even
7 bits, 1 bit, odd
7 bits, 1 bit, no parity
8 bits, 2 bits, even
8 bits, 2 bits, odd
8 bits, 2 bits, no parity
8 bits, 1 bit, even
8 bits, 1 bit, odd
8 bits, 1 bit, no parity
2- 3 - 3 Start Code Disable. Disable. When power is turned ON
Set.
2- 3 -4 Start Code (setting) 00 Hex 00 Hex When power is turned ON
:
FF hex
2- 3 -5 End Code None
(Received Bytes) Received Bytes (no end code) When power is turned ON
CR, LF
Set End Code
2- 3 -6 Received Bytes
(setting) 256 bytes 256 bytes When power is turned ON
1 byte
:
255 bytes
2- 3 -7 Set End Code
(setting) 00 Hex 00 Hex When power is turned ON
:
FF Hex
2- 3 - 8 Delay 0 ms 0 (×10 ms) When power is turned ON
:
9999 (×10 ms)
2-5 Modbus-RTU Easy Master Settings
2-5-1 Baud 9,600 bps 1,200 bps When power is turned ON
2,400 bps
4, 8 00 bps
9,600 bps
19,200 bps
38 ,400 bps
57,600 bps
115,200 bps
Name Default Possible settings
When setting is read by
CPU Unit