Omron SYSMAC CP Series, User Manual

Page: 359 / 578

15-29
15 Ethernet
CP2E CPU Unit Software User’s Manual(W614)
15-4 FINS C
o
mm
u
n
ication
s
15
15-4-6 N
e
w F
INS Command
s
Remote TCP Port Number (Response)
Specifies the TCP port number for the remote node.
TCP Transitions (Response)
Specifies the TCP connection status using the following numbers.
For details on TCP status changes, refer to A-6-1 TCP Statu s Tran s ition s .
Response Codes
z
IP ADDRESS TABLE WRITE: 2750
Writes the IP address table.
Command Block
Response Block
Parameters
Number of Records (Command)
The number of records to write is specified in hexadecimal between 0000 and 0020 (0 to 3 2 deci-
mal) in the command. If this value is set to 0, the IP address table will be cleared so that no records
are registered.
Number Status Meaning
00000000 CLOSED Connection closed.
00000001 LISTEN Waiting for connection.
00000002 SYN SENT SYN sent in active status.
0000000 3 SYN RECEIVED SYN received and sent.
00000004 ESTABLISHED Already established.
00000005 CLOSE WAIT FIN received and waiting for completion.
00000006 FIN WAIT 1 Completed and FIN sent.
00000007 CLOSING Completed and exchanged FIN. Awaiting ACK.
0000000 8 LAST ACK FIN sent and completed. Awaiting ACK.
00000009 FIN WAIT 2 Completed and ACK received. Awaiting FIN.
0000000A TIME WAIT After closing, pauses twice the maximum seg-
ment life (2MSL).
Response code Description
0000 Normal
0105 Node address setting error
Local IP address setting error
1004 Command format error
1100 Connection number not set from 1 to 3
Nu m b er
of records
IP address
ta
b le records
Command
code
27 50
IP address
ta
b le records
6 b ytes 6 b ytes
Command
code
Response
code
27 51