![background image](http://html1.mh-extra.com/html/omron/sysmac-c200hw-pcs01-ev1/sysmac-c200hw-pcs01-ev1_operation-manual_742247041.webp)
25
4-1-2 Setting the C200HX/HG/HE System Switch
The CMCR expansion instruction is used to operate the memory card in the PC
Card Unit. Turn ON pin no. 4 on the DIP switch to enable allocating expansion
instructions for the C200HX/HG/HE.
DIP switch
4-1-3 Allocating a Function Code for CMCR
Use the SYSMAC Support Software or Programming Console to allocate a func-
tion code to the CMCR instruction (CARD MACRO instruction).
•
The following 18 function codes can be allocated to expansion instructions:
17 to 19, 47, 48, 60 to 69, and 87 to 89.
•
A default instruction is already allocated to each expansion function code.
•
One instruction cannot be allocated to more than one function code.
•
Information about the correspondence between expansion instructions and
function codes is stored in the system area in the user program.
•
This operation can be performed only when DIP switch pin no. 1 is OFF (user
program write-enabled) and pin no. 4 is ON (settings other than default set-
ting).
•
Switch the PC operating mode to PROGRAM mode.
Before Installing a PC Card Unit
Section 4-1
Summary of Contents for SYSMAC C200HW-PCS01-EV1
