Omron SYSMAC C200HW-PCS01-EV1, Operation Manual

Page: 50 / 261

34
4-4-1 When a SYSMAC LINK Unit or SYSMAC NET Link Unit is Not Used
Note Always install the PC Card Unit in the slot on the left of the C200HX/HG/HE CPU.
If the PC Card Unit is installed in another slot, the Bus Connection Unit cannot be
installed.
1, 2, 3... 1. Hitch the claw on the upper edge of the bottom of the PC Card Unit to the
CPU Backplane as shown in the figure below.
2. Insert the connector on the PC Card Unit all the way into the connector on
the CPU Backplane.
When the PC Card Unit is correctly installed a click will be audible. Insert the
connector until the click is heard.
Note To remove the PC Card Unit, lift the Unit while pressing the lock lever with a
screwdriver as shown in the figure below.
Mounting the PC Card Unit
Section 4-4