![background image](http://html1.mh-extra.com/html/omron/sysmac-c200hw-pcs01-ev1/sysmac-c200hw-pcs01-ev1_operation-manual_742247036.webp)
20
3-1
Outline
The procedures to prepare for operation are outlined below. Be sure to familiar-
ize yourself with this basic procedure.
Procedures are explained in more detail in 3-2 Procedures.
1, 2, 3...
1. Communications Board Installation
Mount the Communications Board to the C200HX/HG/HE.
2. C200HX/HG/HE Setup
Assign a function code for the CARD MACRO (CMCR) expansion instruc-
tion.
3. PC Card Unit Setup
Mount the PC Card Unit and make the required settings.
4. Programming
Create the program.
5. Program Debugging
Debug the program.
6. Operation.
3-2
Procedures
This section outlines the steps required to install and set up the PC Card Unit and
peripheral devices and prepare for application development and operation. Be
sure that you thoroughly understand all of these sets. References for further
reading are provided for each procedure.
1. Communications Board
Mount either the C200HW-COM01 or C200HW-COM04-E Communications
Board to the C200HX/HG/HE CPU. Refer to the C200HW-COM01 to 06-E Com-
munications Board Operation Manual for details.
2. C200HX/HG/HE Setup
Two steps are required to prepare the C200HX/HG/H for PC Card Unit applica-
tion.
•
Adding CMCR
Use either the SYSMAC Support Software or the Programming Console to
assign a function code to the CARD MACRO (CMCR) instruction.
•
System Switch Setting
Turn ON DIP switch pin no. 4 to enable setting expansion instructions for the
C200HX/HG/HE.
3. PC Card Unit Setup
Two steps are required to set up the PC Card Unit.
•
System Switch Setting
Set the startup mode, memory card initialization type, the operating level,
and other settings. If only the memory card function is to be used, set only
the operating level and leave the other pins set to OFF.
•
Unit and Peripheral Connections
Mount the PC Card Unit to the Backplane and install the Bus Connection
Unit and memory card.
4-1
4-1
4-3
4-4 to 4-6
Procedures
Section 3-2
Summary of Contents for SYSMAC C200HW-PCS01-EV1
