![background image](http://html1.mh-extra.com/html/omron/sysmac-c200hw-pcs01-ev1/sysmac-c200hw-pcs01-ev1_operation-manual_742247230.webp)
Appendix D
Response Codes from the C200HX/HG/HE CPU
214
Main code
Remedy
Probable cause
Sub-
code
26: Command error
01
The specified area is not protected.
This response code will be returned if
an attempt is made to clear protection
on an area that is not protected.
The program area is not protected, so it
isn’t necessary to clear protection.
02
An incorrect password has been
specified.
Specify a password that is registered.
04
The specified area is protected.
Execute the command again after the
PROGRAM AREA PROTECT CLEAR
command.
Too many commands at destination.
The destination has received more than 5
commands. Either interrupt servicing or
wait for servicing to complete before
re-executing the command.
05
The service is being executed.
Execute the command again after the
service has been completed or aborted.
06
The service is not being executed.
Execute the service if necessary.
07
Service cannot be executed from local
node because the local node is not
part of the data link.
Execute the service from a node that is
part of the data link.
A buffer error has prevented returning
a normal response.
Reset the board. If the error persists,
replace the board.
08
Service cannot be executed because
necessary settings haven’t been
made.
Make the necessary settings.
09
Service cannot be executed because
necessary settings haven’t been made
in the command data.
Check the command format and make the
necessary settings.
0A
The specified action or transition
number has already been registered.
Execute the command again using an
action or transition number that hasn’t
been registered.
0B
Cannot clear error because the cause
of the error still exists.
Eliminate the cause of the error and
execute the ERROR CLEAR command.
30: Access right error
01
The access right is held by another
device.
Execute the command again after the
access right has been released.
(The command can be executed after the
ACCESS RIGHT FORCED ACQUIRE or
ACCESS RIGHT RELEASE command is
completed. Releasing the access right
might affect processes in progress at the
node that held the access right.)
40: Abort
01
Command was aborted with ABORT
command.
---
Summary of Contents for SYSMAC C200HW-PCS01-EV1
