Omron SYSMAC C200HW-PCS01-EV1, Operation Manual

Page: 40 / 261

24
4-1 Before Installing a PC Card Unit
Before installing a PC Card Unit, set up the C200HX/HG/HE.
Note Always set up the C200HX/HG/HE. Otherwise, a PC Card Unit cannot be used.
4-1-1 Mounting a Communications Board
A Communications Board must be mounted in the C200HX/HG/HE to connect a
PC Card Unit. There are two Communications Boards that can be used, as
shown below. Use the Communications Board that matches your system
requirements (i.e., the C200HW-COM04-E can be used to provide an RS-232C
port in addition to the CPU bus interface for the PC Card Unit.
C200HW-COM01 (with CPU bus
interface only)
C200HW-COM04-E (with CPU bus
interface and RS-232C port)
Refer to the C200HW-COM01 to 06-E Communications Board Operation
Manual for details on installing a Communications Board.
Before Installing a PC Card Unit
Section 4-1