![background image](http://html1.mh-extra.com/html/omron/sysmac-c200hw-pcs01-ev1/sysmac-c200hw-pcs01-ev1_operation-manual_742247032.webp)
16
2-4-2 Devices Required for Memory Cards
Memory Cards
Applicable Memory Cards
ATA-compatible cards can be used.
Note Before purchasing a memory card (SRAM, FLASH, or ATA), always make sure
that it can be used with Phoenix PCM Plus 3.2.
2-4-3 Devices Required for Ethernet
The following devices are required to install Ethernet by using the setup software
(provided with the Ethernet Set).
Host Link Cable
The user must provide the host link cable to connect the computer to the PC
Card Unit.
RS-232C connectors are used. Applicable connectors are as follows:
XM2A-0901 (connector)
OMRON
XM2S-0911 (connector cover)
OMRON
Personal Computer
Prepare an AT or compatible computer. The computer must have at least one
RS-232C port available.
Ethernet Card
Ethernet Card
Adaptor
Applicable Ethernet Cards
The PC Card Unit uses a DOS ODI driver. Although two DOS ODI drivers are
currently in existence (SPEC3 and SPEC4), the PC Card Unit supports the
SPEC3 ODI driver only. Therefore, Ethernet cards that have only the SPEC4
ODI driver cannot be used.
Hub
Hub
Cable
Twisted-pair Cable
Other Required Peripheral Devices
Section 2-4
Summary of Contents for SYSMAC C200HW-PCS01-EV1
