Omron SYSMAC C200HW-PCS01-EV1, Operation Manual

Page: 239 / 261

223
Appendix I
Contents of Version Upgrade (PCS01-E to PCS01-EV1)
This appendix outlines the functions that have been added for the upgrade to C200HW-PCS01-EV1.
Socket Interface Support
UDP and TCP socket interfaces are supported by FINS commands. Refer to Section NO TAG FINS Commands
and Section NO TAG Socket Services.
Remote Tool Connection
Remote tool connection to the C200HX/HG/HE via the PC Card Unit interface is made possible by peripheral bus
connection to the C200HX/HG/HE and host link connection from SYSMAC Support Software (SSS).
With remote tool connection via PCU Card Unit Ethernet, it is not possible to use SYSMAC Link-related functions
such as starting and stopping SYSMAC Link and making data link settings.
Refer to Appendix J Remote Tool Connection Procedure.
FINS Command Expansion
•
0501: Added data such as local IP address, FINS UDP port number, etc., to response.
•
0801: Added loopback command.
•
Added commands for socket interface.
Refer to Section NO TAG Using FINS Commands and Responses.
Setup Software Expansion
•
Added function for reading Ethernet settings.
•
Added function for clearing Ethernet settings.
Refer to NO TAG Using SETUP2.EXE.