Omron SYSMAC C200HW-PCS01-EV1, Operation Manual

Page: 85 / 261

69
Unit Restrictions and Mounting Locations
When a PC Card Unit is used, only one SYSMAC LINK Unit or SYSMAC
NET Link Unit can be used on the CPU Backplane.
When a PC Card Unit and SYSMAC LINK Unit or SYSMAC NET Link Unit
are used together on the CPU Backplane, they must be mounted in the slots
shown in the following illustration.
SYSMAC LINK Unit
Mount the PC Card Unit to the
left of the SYSMAC LINK Unit
C200HX/HG/HE CPU PC Card Unit
4. Ethernet Setup
•
Ethernet Card Installation
Install the Ethernet Card into the PC Card Unit.
•
Ethernet Connection
Connect the PC Card Unit to the Ethernet network.
•
Personal Computer Setup
Connect the PC Card Unit to a personal computer and copy the setup soft-
ware.
•
Setup Software Settings
Activate the setup software on the personal computer and carry out all set-
tings for Ethernet.
5. Programming
Use SYSMAC Support Software with a personal computer to create the ladder
program. For details regarding ladder programming, refer to the SYSMAC Sup-
port Software Operation Manuals.
6. Program Debugging Use a memory card with the program that has been created and correct any
bugs that may be found.
7. Operation Proceed with actual operation.
7-2
7-3
7-4
7-5 and 7-6
8 to 11
Procedures
Section 6-2