![background image](http://html1.mh-extra.com/html/omron/sysmac-c200hw-pcs01-ev1/sysmac-c200hw-pcs01-ev1_operation-manual_742247048.webp)
32
Pin 4 and pin 3 settings
Description
OFF
OFF
SRAM and ATA cards
Format card in slot 1
OFF
ON
SRAM and ATA cards
Format card in slot 2
ON
OFF
FLASH card
Format card in slot 1
ON
ON
FLASH card
Format card in slot 2
Note Memory cards can also be formatted using PCMCIA2.1-compliant equipment
such as personal computers. In this case, SRAM and ATA Cards must be for-
matted in FAT format, and FLASH Cards must be formatted in MS-FLASH for-
mat.
4-3-5 Formatting Memory Cards
Note Formatting a memory card erases all data from the card. Before formatting a
memory card, always back up all the necessary data from the card.
Turning pin 2 OFF then ON, or ON then OFF starts formatting the memory card.
Pin no. 2 is valid, however, only when the startup mode is set to the memory card
formatting mode (FMT indicator will be lit).
Pin 2
If formatting starts normally, the FMT indicator will light and the indicator for the
PC card slot will flash.
The FMT indicator will go OFF when formatting is complete.
Turn the power OFF, then remove the card.
Note Refer to 5-2 Formatting Memory Cards for details on formatting memory cards.
Card Format and Slot
Settings (Pins 4 and 3)
Setting the System Switch
Section 4-3
Summary of Contents for SYSMAC C200HW-PCS01-EV1
