![background image](http://html1.mh-extra.com/html/omron/sysmac-c200hw-pcs01-ev1/sysmac-c200hw-pcs01-ev1_operation-manual_742247128.webp)
112
Control Data
Control data is written beginning with the first control data word in the following
format:
Word
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
No. of retries
Response monitoring time
Source node address
*1
*2
*3
*4
0
0
0
Unit address of
source node
*4: Indirect addressing bit for beginning source word
(0: Direct addressing, 1: Indirect addressing)
Number of words transferred
Bit
C+0
C+1
C+2
*1: Fixed at 1
*3: Response request bit (0: Response required, 1: Response not required)
*2: Operating level (0: level #1, 1: level #0)
Number of words transferred:
Specify the total number of words to be written from the source node to the local
node in hexadecimal (0 to 3E8).
Operating Level:
Specify the operating level of the PC Card Unit
Response request bit:
Set this bit to 0 (OFF: response required) because the RECV(98) instruction
must return response data.
Indirect addressing bit for beginning source word:
Because CV-series PCs support larger areas than C-series PCs, the user may
not be able to specify the beginning source word of the source node in the
RECV(98) instruction operand. The beginning source word of the source node
may also need to be changed in some situations. In this case, set this bit to 1
(ON: indirect addressing). Then, the first operand (S) becomes an beginning
indirect source word, allowing the beginning source word (rightmost) at the
source node to be specified with the word specified for S in BCD format as
shown below.
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Area type
0
0
0
0
Word addr (5th digit)
Bit
Word
S+0
S+1
Word addr (3rd digit) Word addr (2nd digit) Word addr (1st digit)
Word addr (4th digit)
When remote node is C-series PC
When remote node is CV-series PC
Area
Area
type
Area
Area
type
IR/SR area
00
CIO Area
00
LR area (LR)
06
CPU Bus Link Area (G)
01
HR area (HR)
07
Auxiliary Area (A)
02
AR area (AR)
08
Timer Area (TIM)
03
Timer/Counter Area
(TIM/CNT)
03
Counter Area (CNT)
04
DM area (DM)
05
DM Area (DM)
05
Expansion DM
Banks 0 to 7:
Current bank:
10 to 17
18
Expansion DM
Banks 0 to 7:
Current bank:
10 to 17
18
No. of retries:
Specify the maximum number of retries to be executed when no response is
returned after the RECV(98) instruction is issued. Specify the number in hexa-
decimal (0 to F).
RECV(98)
Section 8-3
Summary of Contents for SYSMAC C200HW-PCS01-EV1
