![background image](http://html1.mh-extra.com/html/omron/sysmac-c200hw-pcs01-ev1/sysmac-c200hw-pcs01-ev1_operation-manual_742247113.webp)
97
An example of specifying relay networks is shown below. The input proce-
dure is the same as that described in 7-6-6 HOSTS File.
(0) 2 1 32 (Data is sent to the network via node 32.)
(1) 3 1 33 (Data is sent to the network via node 33.)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
9. After editing the relay network table, select “End (13).”
Enter Number of Line To Change (0–9), Add Line (10), Delete Line (0–9),
Display Previous Item (11), Display Next Item (12), End (13):
1. Set My Network address
2. Set Relay Network address
3. Exit
Select Number for ITEM (1–3):
10. Enter 3 and press ENTER to select “3. Exit.”
The screen will return to the main menu.
7-6-9 Gateway Address
1, 2, 3...
1. Select “7. Edit Gateway address for UNIT” from the main menu.
.
.
Select Number for ITEM (1–9): 7
Current Gateway address:
New Gateway address:
2. Enter the IP address of the node to be used as a gateway.
New Gateway address: 123.45.0.0
: 123.45.0.0 May I setup current data? (Y/N)
3. Make sure that the IP address is correct. Then, enter Y and press ENTER.
The screen will return to the main menu. To cancel the setting, enter N and
press ENTER to return to the main menu.
Setup Software Operation
Section 7-6
Summary of Contents for SYSMAC C200HW-PCS01-EV1
