Omron SYSMAC C200HW-PCS01-EV1, Operation Manual

Page: 117 / 261

101
Changing the Startup Mode (System Switch)
Change the PC Card Unit’s startup mode (system switch) by setting pins 5 and 6
to ON.
Pin 6
Pin 5
7-7-3 SETUP2.EXE Operation
SETUP2.EXE is basically operated in the same way as SETUP.EXE. The func-
tions explained here are the ones that SETUP.EXE does not have. For explana-
tions of the other functions, refer to 7-6 Setup Software Operation.
Starting SETUP2.EXE
1, 2, 3... 1. After the terminal software prompt, enter “SETUP2” and press ENTER.
Note To display the text in Japanese instead of English, enter “SETUP2 /J”
here.
F: \SETUP2
The setup software will start and the main menu will be displayed as follows:
1. Enter IP address for UNIT.
2. Enter Subnet address for UNIT.
3. Enter ODI Driver Path.
4. Edit HOSTS File.
5. Edit Conversion Table for IP address and FINS Node address.
6. Edit Routing Table for FINS.
7. Edit Gateway address for UNIT.
8. Uninstall.
9. Exit.
Select Number for Item (1–9):
2. Select the desired function by entering the corresponding number (1 to 9)
and pressing ENTER.
When a number from 1 to 7 is selected, the individual settings can be read
and edited.
All of the operations except for “3. Enter ODI Driver Path” and “8. Uninstall”
are the same as for SETUP.EXE. For explanations of those operations, refer
to 7-6 Setup Software Operation.
Using SETUP2.EXE
Section 7-7