Omron SYSMAC C200HW-PCS01-EV1, Operation Manual

Page: 49 / 261

33
4-3-6 Setting the Operating Level
Pin 1 is used to set the PC Card Unit operating level. The procedure and pin set-
tings are described below.
Pin 1
Pin 1 setting Description
OFF Level #1
ON Level #0
If the SYSMAC LINK Unit or SYSMAC NET Link Unit is to be used together with a
PC Card Unit, select a different level.
Note Do not switch the operating level while the PC Card Unit is operating. Otherwise,
the Unit will fail to operate normally.
4-4 Mounting the PC Card Unit
This section describes how to mount the PC Card Unit on the CPU Backplane.
Note Before mounting the PC Card Unit on a CPU Backplane, always mount the
C200HW-COM01 or C200HW-COM04-E Communications Board in the
C200HX/HG/HE. Refer to the C200HW-COM01 to 06-E Communications
Board Operation Manual for the mounting procedure.
Operating Level (Pin 1)
Mounting the PC Card Unit
Section 4-4