![background image](http://html1.mh-extra.com/html/omron/sysmac-c200hw-pcs01-ev1/sysmac-c200hw-pcs01-ev1_operation-manual_742247084.webp)
68
6-1
Outline
The procedures required to prepare for operation are outlined below. Be sure to
familiarize yourself with these basic procedures.
These procedures are explained in more detail in 6-2 Procedures.
1, 2, 3...
1. Communications Board Installation
Mount the Communications Board in the C200HX/HG/HE CPU.
2. C200HX/HG/HE Setup
Assign a function code to the CARD MACRO (CMCR) expansion instruc-
tion.
3. PC Card Unit Setup
Mount the PC Card Unit and make the required settings.
4. Ethernet Setup
Install the Ethernet Card and set up Ethernet using the setup software so
that the communications software can be used.
5. Programming
Write the program.
6. Debugging
Debug the program.
7. Operation
6-2
Procedures
This section outlines the procedures required to install and set up the PC Card
Unit and peripheral devices for application development and operation. Be sure
that you thoroughly understand all of these procedures. References for further
reading are provided for each procedure.
1. Communication Board
Mount either the C200HW-COM01 or C200HW-COM04-E Communications
Board in the C200HX/HG/HE CPU. Refer to the C200HW-COM01 to 06-E Com-
munications Board Operation Manual for details.
2. C200HX/HG/HE Setup
Two steps are require to prepare the C200HX/HG/H for PC Card Unit applica-
tion.
•
Addition of CMCR
Use either the SYSMAC Support Software or the Programming Console to
assign a function code to the CARD MACRO (CMCR) instruction.
•
System Switch Setting
Turn ON DIP switch pin number 4 to enable setting expansion instructions
for the C200HX/HG/HE.
3. PC Card Unit Setup
Two steps are required to set up the PC Card Unit.
•
System Switch Setting
Set the startup mode, memory card initialization type, the operating level,
etc. If only the memory card function is to be used, set only the operating
level and leave the other pins set to OFF.
•
Unit and Peripheral Connections
Mount the PC Card Unit on the Backplane and install the Bus Connection
Unit and memory card.
4-1
4-1
4-3
4-4 to 4-6
Procedures
Section 6-2
Summary of Contents for SYSMAC C200HW-PCS01-EV1
