![background image](http://html1.mh-extra.com/html/omron/sysmac-c200hw-pcs01-ev1/sysmac-c200hw-pcs01-ev1_operation-manual_742247064.webp)
48
4. Input the following underlined characters.
F:\>FORMAT H: /U
↵
5. If an MS-DOS error message appears, select “FAIL.” The format will be for-
cibly executed.
5-2-2 Setting the Memory Card Formatting Mode
Use pins 6 and 5 to set the memory card formatting mode. The setting procedure
and pin settings are described below.
Note Restart the PC Card Unit to use new system switch settings. By default, all pins
are set to OFF. Change the switch settings as necessary.
Pin 6
Pin 5
Pin 6 and pin 5 settings
Description
ON
OFF
Memory card formatting mode.
The FMT indicator flashes. This mode is used to format
the card inserted in the PC card slot. SRAM, ATA, and
FLASH cards can be inserted in the slot.
5-2-3 Starting Memory Card Formatting
Note Formatting a memory card erases all data from the card. Before formatting a
memory card, always back up all the necessary data from the card.
Turning pin 2 OFF then ON, or ON then OFF starts formatting the memory card.
Pin no. 2, however, is valid only when the startup mode is the memory card for-
matting mode (FMT indicator will be lit).
Pin 2
Any card is formatted into a single partition and is given volume label “C200HW.”
SRAM and ATA cards are formatted in FAT format, and FLASH cards are for-
matted in MS-FLASH format.
Start Mode Settings
(Pins 6 and 5)
Formatting Memory Cards
Section 5-2
Summary of Contents for SYSMAC C200HW-PCS01-EV1
