Omron SYSMAC C200HW-PCS01-EV1, Operation Manual

Page: 52 / 261

36
4-5 Installing the Bus Connection Unit
There are two Bus Connection Units that can be used: C200HW-CE011 and
C200HW-CE012.
The C200HW-CE011 is used to connect a PC Card Unit to the C200HX/HG/HE.
The C200HW-CE012 is used to connect a SYSMAC LINK Unit or SYSMAC NET
Link Unit to the C200HX/HG/HE together with a PC Card Unit.
This section describes how to install the C200HW-CE011 and C200HW-CE012.
4-5-1 Installing the C200HW-CE011
Before installing the C200HW-CE011 Bus Connection Unit, mount the C200HX/
HG/HE CPU and PC Card Unit in the correct slots in the CPU Backplane.
The name and function of each component are described below.
CPU bus interface connector 1
C200HW-CE011 Bus Connection Unit
CPU bus interface connector 2
CPU bus interface connector 1
This connector connects to the CPU Bus Interface Connector on the PC Card
Unit.
CPU bus interface connector 2
This connector connects to the CPU Bus Interface Connector on the C200HX/
HG/HE CPU.
Installation Procedure
1, 2, 3... 1. Connect the CPU bus interface connectors 1 and 2 to the two connectors in
the Bus Connection Unit as shown in the figure below and press them firmly
into place.
Name and Function of Each
Component
Installing the Bus Connection Unit
Section 4-5