![background image](http://html1.mh-extra.com/html/omron/sysmac-c200hw-pcs01-ev1/sysmac-c200hw-pcs01-ev1_operation-manual_742247104.webp)
88
2. To start the setup software from the floppy disk, release the write-protect
notch to make the floppy disk writable. However, we recommend that the
setup software be copied to the hard disk because starting the setup soft-
ware from the floppy disk slows down the setup speed.
3. Copy the ODI driver for the Ethernet card to be used to the same directory as
the SETUP.EXE beforehand.
4. To enable the setup software to be started from within the SYSMAC Support
Software, copy the setup software to the same directory as the SYSMAC
Support Software.
Starting the Setup Software
1, 2, 3...
1. Switch to the directory to which the setup software was copied.
C: \>CD \SETUP
2. Enter SETUP at the DOS prompt and press ENTER.
C: \SETUP>SETUP
The COM port can be specified by entering SETUP /1 or SETUP /2, then press-
ing ENTER. If the COM port is not specified, COM1 is used as default.
The setup software is started, and the following main menu appears on the dis-
play:
1. Enter IP address for UNIT.
2. Enter Subnet address for UNIT.
3. Enter ODI Driver Path.
4. Edit HOSTS File.
5. Edit Conversion Table for IP address and FINS Node address.
6. Edit Routing Table for FINS.
7. Edit Gateway address for UNIT.
8. Transfer Setup Data From Computer to UNIT.
9. Exit.
Select Number for Item (1–9):
3. Select the desired function by entering the corresponding number (1 to 9)
and pressing ENTER. Refer to the following pages for how to enter each
item.
Note When all the necessary items have been set, select “8. Transfer Setup Data
From Computer to UNIT” to transfer the settings to the PC Card Unit. Even if
items are only set using the setup software, the settings will not be reflected in
the PC Card Unit. To reflect the settings in the PC Card Unit, check that the set-
tings are all correct, then transfer the settings to the PC Card Unit.
Setup Software Operation
Section 7-6
Summary of Contents for SYSMAC C200HW-PCS01-EV1
