background image

1

 

 

Z3 C onfidential

 

 

CONFIDENTIAL 

DOC-USR-0097-05 

 

____________________________________________________________________________________

 

Z3 Technology, LLC 

 100 N. 8th St. STE 250 

 Lincoln, NE 68508-1369 USA 

 +1.402.323.0702 

 

 

 
 

User Instructions 

H.265 Encoding System 

Rapid Production Starter Kit 

Model Name:

 

Z3-HE2160-RPS

 

DOC-USR-0168-01 

Manual Version 1.0 

August 7, 2018 

 

 

 

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 

 

This document contains proprietary information of Z3 Technology, LLC ("Z3").  This document may not be used, reproduced, disclosed, or 

disseminated to anyone without the prior written approval of an authorized representative of Z3. Z3 reserves the right to change this product at 

any time and without notice. All product names, trademarks, trade names, service marks, or service names mentioned in this document are the 

property of their respective owners. 

 

 

Z3 Technology, LLC incorporates HDMI® technology.

 

The terms of HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are 

trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 

Summary of Contents for Z3-HE2160-RPS



















Reviews: